Will using a watch winder cause the watch to be magnetized?

       1. Don't overuse

   Long-term stoppage will damage the watch movement, and the gears will be damaged if they are not running. Long-term continuous walking will naturally cause wear and tear on the gears and shorten the service life. The barrel has been in a tight state for a long time and will cause it to break. Under normal circumstances, it is the ideal state to wind an automatic mechanical watch to 80%--90%.

   2. The strength of the meter winder is very important

The watch winder achieves the function of automatic winding through the rotation of the motor. Some watch winders have a very strong motor and can only be shaken mechanically in one direction, while some high-end watch winders will rotate single or double to set the time, and the strength is just enough. Winding force, under normal circumstances, it is sufficient to stop after 800 laps within the set time.

   Three, the antimagnetic of the meter winder is very important

When the motor rotates, it will generate a magnetic field and diverge magnetic waves. The low-quality watch winder is not equipped with a magnetic shield. Although the watch has anti-magnetic function, it will inevitably have the risk of magnetism if it is used for a long time. The high-end watch winder is not only anti-magnetic in the motor. The watch box is also equipped with an anti-magnetic cover to resist external magnetic fields, just like a refrigerator protects food.


   product care

1. Any watch should not be worn in warm water or in the bathroom, even if your watch is a waterproof watch, because the watch's sealing roll rubber is easy to age when heated, and the surrounding water vapor molecules are relatively small, which can easily penetrate into the case and cause internal machinery Damage.

   2. If the watch is abnormal, it should be sent to a special watch store for inspection immediately.

  3. The mechanical automatic watch must be in sufficient activity level, that is, it must be worn for more than 10 hours a day before it can operate normally.

  4. Different watches should be worn on different occasions. For example, it is best to choose a sports watch with excellent waterproof and shock resistance when exercising.

   5. If there is a watch labeled WATER RESISTANT or 3ATM on the watch cover, it is generally only suitable for water spray or light rain without pressure.

        6. Since the internal mechanical structure of each watch is different, under normal use, the error of a mechanical watch or a mechanical automatic watch is within 30 seconds per day (this standard is promulgated by the national ministries), while the quartz watch’s The error is lower and more accurate.

   7. It is best to put a desiccant in the place where the watch is placed, but avoid using mothballs, insect repellent and other chemicals.
 
      
      The most needed watch to winder the watch is the perpetual calendar automatic watch. This kind of watch is more troublesome to repair. Some perpetuals can be reversed and are very easy to break. If you need to ensure that the watch runs normally, you need a watch winder to ensure it. Other automatic machinery Watch running time is also beneficial. Common perpetual calendar watches cannot quickly adjust the date and other display of the watch back and forth at will. Once the movement stops, the secondary adjustment is not only troublesome, but also easy to damage. Therefore, a watch winder is needed to simulate human wear, so that it can continuously wind up and supplement energy to support the normal operation of the movement.

Comments

Popular posts from this blog

What are the factors that affect the measurement accuracy of the watch winder

Is the watch winder good for a self-winding watch? What are the invisible damages of long-term use?

Why does a mechanical watch need a watch winder?